Fusion Air-Line Special

ABS Material

The system of fusion Air–Line special is made of engineering thermoplastics Acrylonitrile-Butadiene-Styrene (ABS) with a range of performance. Advanced manufacturing techniques allow the formation of a liner layer in the pipe bore. The liner is a high performance co polymeric material which offers extra strength (because it is permanently fused with the outer, ABS layer during the extrusion process).It also help from attack if exposed to some compressor oil details is available in our technical data. If in doubt always check before installation.

Technical Specifications:

Maximum	13 bar from +20^oC to +60^oC
Working Pressure	16 bar from +20^oC to +45^oC
Max- Working Temp.	From -10^oC to +60^oC
Storage Temp.	From -40^oC to +70^oC

FUSION AIR-LINE SPECIAL - STANDARD AS PER AS/NZS 3518 (S-1)
OUTSIDE DIAMETER		WALL THICKNESS
SIZE		PN-18		PN-15		PN-12
INCH	MM	MIN.	MAX.	MIN.	MAX.	MIN.	MAX.
½"	17	1.8	2.2	1.6	1.9	-	-
¾"	21			2.00	2.40	1.60	2.00
1"	26			2.40	2.90	2.00	2.40
1¼	33			3.10	3.60	2.50	2.90
1½	42			3.90	4.40	3.10	3.70
2"	48			4.40	5.00	3.60	4.10

FUSION AIR-LINE SPECIAL AS PER AS/NZS 3518(S-3)
OUTSIDE DIAMETER		WALL THICKNESS
SIZE		PN-16		PN-10
INCH	MM	MIN.	MAX.	MIN.	MAX.
2/1/4"	63	4.70	5.40	3.00	3.50
2/1/2"	75	5.60	6.40	3.60	4.20
3"	90	6.70	7.60	4.30	5.00
4"	110	8.10	9.20	5.30	6.10

Quality -

All pipes, fittings and valves are manufactured in an environment operating a quality system as per ISO 9001-2008. As part of this Quality System both raw materials and finished Fusion Air-Line Special products are subjected to rigorous quality control tests. In addition, long term pressure tests together with ageing, weathering and stressed environmental tests are carried out.

Safety -

The Butadiene constituents of fusion Air-Line affords resistance to accidental damage and prevents material fracture should the pipe be subjected to severe impact – even at sub-zero temperatures. Fusion Air –Line special design life of 30 years with a residual factor of safety of 2:1

Area of use -

Downstream from the receiver are after cooling only. Fusion air line must not be threaded.

Technical back-up -

From manufacture to market and instalation place, Fusion Air-Line Special is supported by a team of a specialist support engineers, which is readily available to give its expert advice on any aspect of the product.

Technical Data -

Design and installation with monogram & maximum recommended flow rates, pressure temperature parameters, for compressed Air temperature and installation guide and list of compressor oil suitability all details are given in our technical

PPR Submersible Pump Pipe Manufacturer India, PPR Pipe Fitting Tool Manufacturer India, PPR Pipe Exporter India, PPR Pipe Coils Manufacturer India